Select a country and language
Canada	English	Français
US	English	Español
Mexico	Español
Chile	Español
China	中文

PREMIUM PLUS^® Exterior Flat

Average Rating:

For a classic look on your home's exterior walls, choose BEHR PREMIUM PLUS^® Exterior Flat paint. This traditional, non-reflective matte sheen minimizes surface imperfections on wood and vinyl siding. It provides excellent touch-up to help maintain the look, and it can also be used on stucco, brick and other masonry, as well as fences.

Finish: A flat paint sheen is non-reflective sheen that's easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Best for use in: Wood and vinyl walls and siding; Brick and other masonry; Fences
Coverage: 23-37 m²

Read important application instructions to ensure optimum paint performance.

Find Your Perfect Colour!

Find, Coordinate & Preview Paint Colours

Explore our colour library. Browse our collections of popular and trending colours. Find coordinating colours then preview them in your own virtual room image. Do it all with ColourSmart by BEHR^®.

Explore Colour Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Light blue and light green brush strokes

Product Usage

1 HR Dry Time
2 HR Recoat Time

23-37 m²
Coverage

Soap & Water
Clean-Up

Protect
from Freezing

Where to UseBlank space if empty.

Ideal for Wood, Vinyl and Fiber Cement Sidings; Stucco, Brick, Masonry and Fences.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

Use on properly prepared and cleaned coated and uncoated Exterior surfaces.
Countersink nailheads, fill and sand smooth.
Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
Wash off dirt, grease and chalk with detergent and/or powerwash.
Remove mildew stains with a mildew stain removing product.
Clean and sand new or weathered wood.
Scuff sand or degloss smooth or glossy surfaces.
Scuff sand or etch metals.
Rinse and allow to dry.
Caulk windows, doors and other openings.
Allow new stucco, plaster and masonry to cure for 30 days before painting.

Prime†Blank space if empty.

Use a product such as BEHR^® Multi-Surface Primer & Sealer No. 436.
For optimal colour development, better hide, and to reduce the number of topcoats with deep colours denoted with a dagger (†) on the colour chip, apply a custom tinted primer.
For best results, prime all metal surfaces before painting.
Prime all metal surfaces before painting.

ApplicationBlank space if empty.

Apply when air and surface temperatures are between 10-32°C.
Stir paint occasionally.
Intermix containers of same product to ensure colour and sheen uniformity.
Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or airless sprayer (.015-.021" spray tip, 60 mesh filter).
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
Certain colours may require more than one coat for complete hide. Darker colours may require additional dry time between coats.
Cooler temperatures or higher humidity may prolong drying time.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant. When applying to vinyl, colour choice must be the same colour or lighter than the existing colour. Do not use on floors.

DisposalBlank space if empty.

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read Application Instructions

LIFETIME LIMITED WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

Download Info Sheet