Select a country and language
Canada	English	Français
US	English	Español
Mexico	Español
Chile	Español
China	中文

BEHR MARQUEE^® Exterior Semi-Gloss Enamel

Average Rating:

Add dazzling impact and style to your home's exterior accents with BEHR MARQUEE Exterior Semi-Gloss Enamel paint. This radiant, durable sheen provides a perfectly polished look, vivid colour to trim, windows and doors, including garage doors, as well as shutters and outdoor furniture. It's also great for surfaces like railings and wrought iron.

Finish: A Semi-Gloss paint sheen is a sleek, radiant sheen that creates a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Best for use in: Doors, trim and shutters; Exterior furniture. Do not use on floors.
Coverage: 23-37 m²

Read important application instructions to ensure optimum paint performance.

Find Your Perfect Colour!

Find, Coordinate & Preview Paint Colours

Explore our colour library. Browse our collections of popular and trending colours. Find coordinating colours then preview them in your own virtual room image. Do it all with ColourSmart by BEHR^®.

Explore Colour Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Light blue and light green brush strokes

Product Usage

1 HR Dry Time
2 HR Recoat Time

23-37 m²
Coverage

Soap & Water
Clean-Up

Protect
from Freezing

Where to UseBlank space if empty.

Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Protection for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel and Fences. Do not use on floors.

Usage SummaryBlank space if empty.

Preparation & Prime†Blank space if empty.

Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
Scuff sand or etch metals. Rinse and allow to dry.
Caulk windows, doors and other openings.
Allow new stucco, plaster and masonry to cure for 30 days before painting.
Use BEHR MARQUEE paint as a primer for repaired or uncoated surfaces, including woods that contain tannins and heavily stained areas (two primer coats required for redwood and cedar).
Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR MARQUEE.
For drastic colour changes or when applying deep colours denoted with a dagger (†) on the colour chip, apply a tinted primer coat of BEHR MARQUEE, if needed.

ApplicationBlank space if empty.

Apply product on dry substrates when air and surface temperatures are between 2°-32°C and will remain between 2°-32°C for at least 4 hours after applying.
Allow paint film to dry for at least 60 minutes prior to rain showers when temperatures are between 15°-21° C and 60-70% relative humidity. Lower temperatures, higher humidity or deep colours may increase dry time and/or rain resistance time.
Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
On semi-smooth surfaces, use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015 -.021" spray tip, 60 mesh filter).
On rough surfaces, use a high quality 19-25 mm nap roller cover.
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L
Certain colours may require more than one coat for complete hide.
On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
When applying to vinyl, colour choice must be the same colour or lighter than the existing colour.
Do not use on floors.

DisposalBlank space if empty.

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Blank space if empty.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read Application Instructions

LIFETIME LIMITED WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

Download Info Sheet